Zurück   www.sondersignalanlagen.com > Dachbalken > Hella RTK + OWS
Kennwort vergessen?

Hinweise

Antwort
 
Themen-Optionen Ansicht
Alt 30.08.2009, 15:30   #1
cromwell

Forum-Mitglied
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard Problem with RTK6

Hello!

I seem to have problem when connecting my RTK6 control-unit for the first time.

I have just connected plus 12V and ground to the unit like this:



When I push the light-button to turn on the unit a "zero" just flashes under the light-button and the unit beeps four times fast and after that the whole panel lights up + flashes and beeps and turns it self off.

Could I have connected something wrong or what?
(I have just connected +12V and gound to the unit, nothing else yet).

Geändert von cromwell (30.08.2009 um 15:32 Uhr).
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 15:37   #2
Yannic-Paderborn

Gold-Mitglied
 
Name: Yannic
Registriert seit: 18.10.2008
Ort: Halle (Westf.)
Beiträge: 3.236
Standard

Zitat:
Zitat von cromwell Beitrag anzeigen
Hello!

I seem to have problem when connecting my RTK6 control-unit for the first time.

I have just connected plus 12V and ground to the unit like this:



When I push the light-button to turn on the unit a "zero" just flashes under the light-button and the unit beeps four times fast and after that the whole panel lights up + flashes and beeps and turns it self off.

Could I have connected something wrong or what?
(I have just connected +12V and gound to the unit, nothing else yet).
You have to conect the control unit with the lightbar.
When the controll unit can´t find a lightbar, it reports a misstake.
Yannic-Paderborn ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 16:19   #3
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

Thanks for your fast answer!

Now I have connected the Bus-cable from the control-unit to the central control-unit in the lightbar like this:



And my connections to the central control unit looks like this:



But again when I push the light-button to turn on the unit a "zero" comes up under the light-button and the unit beeps about four times and then turns itself off...

Could I have connected the 2 light-beacons wrong (see upper image)??
Or what can the problem be?
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 16:32   #4
Yannic-Paderborn

Gold-Mitglied
 
Name: Yannic
Registriert seit: 18.10.2008
Ort: Halle (Westf.)
Beiträge: 3.236
Standard

Have you got the original cables?
Which lights do you have?
The flashers or the rotating lights?

If you´ve got the rotating lights, you need a third, cable which checks the ligt.
If this cable is missing, the control unit gives an allert.

Could you take some pictures from the whole construction?
Yannic-Paderborn ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 16:50   #5
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

No, I don´t have the original cables because this rtk6 came with no lights or cables..

The lights I am using are rotating lights made by Britax.

Maybe it is like you say that I need a third cable for the lights.
Where do I connect it?

cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 17:01   #6
Yannic-Paderborn

Gold-Mitglied
 
Name: Yannic
Registriert seit: 18.10.2008
Ort: Halle (Westf.)
Beiträge: 3.236
Standard

Zitat:
Zitat von cromwell Beitrag anzeigen
No, I don´t have the original cables because this rtk6 came with no lights or cables..

The lights I am using are rotating lights made by Britax.

Maybe it is like you say that I need a third cable for the lights.
Where do I connect it?


Yes, thats the misstake.
You need the original Hella lights.

I´ll try to find out, which cables you have to connect with which contact.

Please wait a moment

----------

In the manual I couldn´t find anything about it...

Perhaps somebody else, who knows more about the RTK 6, could help here!
Yannic-Paderborn ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 17:09   #7
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

OK, thanks Yannic!

If anyone knows what the problem is, help would be apprichited.
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 17:15   #8
Freestyle

Bronze-Mitglied
 
Benutzerbild von Freestyle
 
Name: Maik
Registriert seit: 01.06.2009
Ort: Offenburg
Beiträge: 558
Standard

Maybe you need a Third cable on the Controll Unit Like this.

Thats my own Controll Unit



Red and Black to + Brown to -




Rechtschreibfehler sind beabsichtigt und dienen der Belustigung des Lesers.
Freestyle ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 17:40   #9
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

Hi Freestyle!


I connected like you have yours control-unit connected with the third cable and it fixed the problem with the unit turning itself off.
So far so good! Thanks!

But "the zero" still flashes under the light-button, could it be indicating
that there is something wrong with lights?
When I push the buttons nothing seems to happend.
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 18:08   #10
Freestyle

Bronze-Mitglied
 
Benutzerbild von Freestyle
 
Name: Maik
Registriert seit: 01.06.2009
Ort: Offenburg
Beiträge: 558
Standard

I Think you need a Third Cabel on the Light's too
It's like a Control Cabel for the Unit. (Rotation Control)




Rechtschreibfehler sind beabsichtigt und dienen der Belustigung des Lesers.

Geändert von Freestyle (30.08.2009 um 18:14 Uhr).
Freestyle ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 18:13   #11
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

I think you could be right there.. but where/how shall I connect the third cable with the lights?
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 18:20   #12
Commander

Gold-Mitglied
 
Benutzerbild von Commander
 
Registriert seit: 04.05.2004
Beiträge: 4.609
Standard

You need original RTK6 rotators because there are magnetic rotation sensors.
Commander ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 18:26   #13
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

And there is no way to "connect away" these magnetic rotation sensors?
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 20:20   #14
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

Could some of these instructions be the solution for me?
I have only connected 2 cables, B3 to plus rotating light and A3 to minus on light. I think that more must be connected to work... correct me if I am wrong!






St.2 (Kennleuchte Nr.4 - Zusatzkennleuchte hinten Beifahrerseite)


A1 Ausrüstungserkennung Codierleitung 1
A2 Referenz GND Codierleitungen/Rotations-Kontrolle
A3 Minus für Lastkreis Kennleuchte
B1 Ausrüstungserkennung Codierleitung 2
B2 Kombileitung Synchronisation/Rotations-Kontrolle
B3 geschalteter Plus für Lastkreis Kennleuchte



bei KL-DC:


A1: braun-weiß
A2: braun-weiß + braun
A3: braun
B1: unbelegt
B2: weiß
B3: schwarz



bei KL-XR:


A1: unbelegt
A2: braun-weiß
A3: braun
B1: braun-weiß
B2: blau (Syn.)
B3: schwarz



bei sonstiger Kennleuchte als 3. oder 4. Zusatzkennleuchte (auch Fremdhersteller):


A1: Brücke zu A2
A2: Brücke zu A1 und B1
A3: RKL-Minus
B1: Brücke zu A2
B2: unbelegt
B3: RKL-Plus

Geändert von cromwell (30.08.2009 um 20:26 Uhr).
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 30.08.2009, 20:36   #15
Freestyle

Bronze-Mitglied
 
Benutzerbild von Freestyle
 
Name: Maik
Registriert seit: 01.06.2009
Ort: Offenburg
Beiträge: 558
Standard

Zitat:
Zitat von cromwell Beitrag anzeigen
Could some of these instructions be the solution for me?
I have only connected 2 cables, B3 to plus rotating light and A3 to minus on light. I think that more must be connected to work... correct me if I am wrong!


bei sonstiger Kennleuchte als 3. oder 4. Zusatzkennleuchte (auch Fremdhersteller):


A1: Brücke zu A2
A2: Brücke zu A1 und B1
A3: RKL-Minus
B1: Brücke zu A2
B2: unbelegt
B3: RKL-Plus

Try this above KL3 or KL 4 but no Garanty





Rechtschreibfehler sind beabsichtigt und dienen der Belustigung des Lesers.
Freestyle ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 31.08.2009, 00:41   #16
Blaulicht

Gold-Mitglied
 
Benutzerbild von Blaulicht
 
Name: Marcel
Registriert seit: 11.12.2003
Ort: Oberthal / SAAR
Beiträge: 13.729
Standard

OMG
Blaulicht ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 31.08.2009, 08:22   #17
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

What does user Blaulicht think about this? OMG??
I have not tried this last advice yet.. could something go wrong??
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 31.08.2009, 19:09   #18
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

Attention RTK6 experts!
Should I go ahead and connect my 2 rotating-lights like this? :



A1: Brücke zu A2
A2: Brücke zu A1 und B1
A3: RKL-Minus
B1: Brücke zu A2
B2: unbelegt
B3: RKL-Plus


cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 31.08.2009, 19:19   #19
Freestyle

Bronze-Mitglied
 
Benutzerbild von Freestyle
 
Name: Maik
Registriert seit: 01.06.2009
Ort: Offenburg
Beiträge: 558
Standard

Zitat:
Zitat von cromwell Beitrag anzeigen
Attention RTK6 experts!
Should I go ahead and connect my 2 rotating-lights like this? :



A1: Brücke zu A2
A2: Brücke zu A1 und B1
A3: RKL-Minus
B1: Brücke zu A2
B2: unbelegt
B3: RKL-Plus


This switch is for 3. or 4. Beacon.
Also for other Rotation Lights like your's.

A1: Bridge to A2
A2: Bridge to A1 and B1
A3: Beacon -
B1: Bridge to A2
B2: Not used
B3: Beacon +




Rechtschreibfehler sind beabsichtigt und dienen der Belustigung des Lesers.

Geändert von Freestyle (31.08.2009 um 19:23 Uhr).
Freestyle ist offline   Privat Nachricht senden Mit Zitat antworten
Alt 31.08.2009, 22:26   #20
cromwell

Forum-Mitglied
hat dieses Thema eröffnet
 
Benutzerbild von cromwell
 
Registriert seit: 13.11.2006
Ort: Finland
Beiträge: 92
Standard

Yes, now it works!
Thanks to user Freestyle and others for helping me out with this rotating-light issue!

I put a towel in the sirenspeaker pipe to lower the sirensound a bit and it works. But there are now 4 big pieces flashing in the control-unit display to the left.. Has it something to do with siren beeing muffled?? or what?

Lights and siren seems to work fine even with the display flashing.
cromwell ist offline   Privat Nachricht senden Mit Zitat antworten
Antwort

Themen-Optionen
Ansicht

Forumregeln


Alle Zeitangaben in WEZ +2. Es ist jetzt 19:44 Uhr.

Powered by vBulletin® Version 3.8.11 (Deutsch)
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.